As soon as I found out about the quirky Teapot Dome gas station in Zillah, Washington (built in 1922), I just knew I had to make a little papercraft teapot box in its image.
I included as much detail as I could, even making sure to use the correct number of windows, using this image as my main reference.
Using my Teapot Favour Box template, I cut all of the pieces out of 216gsm textured cardstock. I used white for the main body pieces, a light cream for the top rose, and red for the lid, handle and spout pieces. I also cut an extra (red) hexagonal piece and added six small side tabs to form the base.
For the main body, I scored the six white pieces whilst they were still flat using my score board, at 2.5mm horizontal intervals, to create a brickwork effect. I then did the same with the six red lid pieces to create a roof tiled effect.
I attached the main body pieces to the red hexagonal base, then assembled the rest of the teapot box in the usual way.
I created the door and the three windows as a png file in Inkscape and used ‘Print Then Cut’ in Cricut Design Space to cut them out. I also cut out a narrow frame for each one using red cardstock.
I have just updated my Tuxedo Favour Box template to include a regular tie as well as the bow tie. This means that you can now use the template to make a smart suit jacket box!
You can make the suit jacket box using any coloured or patterned cardstock you like. You could even personalise it for a wedding or other special occasion using a particular colour scheme. And how about adding a matching tie and handkerchief! The possibilities are endless!
Remember, if you are making the tuxedo box, I recommend coating the lapels, pocket trims, button and bow tie pieces with clear acrylic gloss varnish to create that iconic satin finish, or alternatively use a black satin finish cardstock.
You may remember that last year I updated my business card to include my new website and some of my favourite 3D papercraft projects, and I also created this little box to display 100 of the cards in.
Well, now I’ve created a different kind of box to hold 70 cards. I went to a networking event recently and this was so handy to carry around to give the cards out.
This is how I made it …
I started by measuring a set of 70 cards and worked out that I needed a 6cm x 15.7cm piece of cardstock, a 13cm x 9.5 piece of cardstock and a 2.5cm x 19cm strip for the belly band. I used the lovely vintage mint green colour again to match my other box and used my scoring board to score the lines shown below, then I cut out the tabs.
I assembled the box using my favourite glue (Cosmic Shimmer Special Acrylic Glue) and started with the front section.
This is how the front section looks from the side once the back piece was glued on and folded over.
Next, I cut out some patterned paper panels to cover each of the sides.
After gluing the panels on, I put all 70 business cards inside the holder, then wrapped the belly band around the centre. I creased all four edges using my bone folder, then trimmed it in the centre and glued the ends loosely together.
As a finishing touch, I die cut a circle out of mint cardstock and a smaller one out of white cardstock and glued them onto the belly band. I then printed and cut out my logo and glued this to the centre.
I love that it perfectly compliments my business card display box, and my cards were kept safe and neatly presented at the event 🥰
What do you think? Will you be giving this project a try?
It’s time for another teapot favour box design and, although we’re nowhere near Halloween, I’ve created this one in the form of a witch’s cauldron!
But then, with St. Patrick’s Day on the horizon, I thought it would also work well as a lucky pot of gold!
The templates to make this favour box come in both SVG and PDF format, making them accessible for a variety of crafting needs.
To make one, you will need:
* Cauldron Teapot Box template (SVG and PDF available) * Computer and printer to print the PDF templates and instructions * Digital cutting machine * Double-sided cardstock (220-250gsm / 80-92lb recommended) * Craft glue / double-sided tape
If you are not using a cutting machine you will also need: * Craft knife / scissors * Scoring tool * Ruler
Watch my video tutorial showing how to assemble the box, and be sure to follow the tips below:
TIP 1 : When attaching the side handle, make sure that it is lined up in the centre.
TIP 2 : Once the lid is assembled, apply a small dot of glue to the centre (underneath) to help hold its position.
TIP 3 : Push the assembled triangular foot through the outside (textured side) of the circular foot holder, then glue the three tabs down to secure it in place.
There are many different ways that you can style your little pot of gold / cauldron boxes. Here are some examples:
Once assembled, your little pot of gold / cauldron teapot box will hold a range of delicious treats, making it the perfect gift box for St Patrick’s Day celebrations or for spooky Halloween surprises!
What will you fill your little boxes with? Let me know in the comments below!
This adorable little heart favour box has an envelope-style lid and can be filled to the brim with sweets or small treats. Easy to assemble, it is perfect for Valentine’s Day, wedding table favours, bridal showers and so much more!
Complete with a heart and a cute paper bow, the templates for this box come in both SVG and PDF format, making them accessible for a variety of crafting needs.
To make one, you will need:
* Heart Favour Box template (SVG and PDF available) * Computer and printer to print the PDF template and instructions * Digital cutting machine * Double-sided cardstock / patterned card (220-250gsm / 80-92lb recommended) * Lighter, double-sided card or paper for the bow (160-220gsm / 60-80lb recommended) * Craft glue / double-sided tape
If you are not using a cutting machine you will also need:
* Craft knife / scissors * Scoring tool * Ruler
Watch my video tutorial showing how to assemble the box, and be sure to follow the tips below:
TIP 1 : Start by assembling the base of the box, then move onto the lid.
TIP 2 : Use foam pads or small scraps of cardstock for added dimension under the heart and square panel.
TIP 3 : Before assembling the paper bow, loop both ends of the curved piece around a pencil or use a bone folder. This will make it easier to get it into the correct shape.
Once the box is finished, it’s ready to be filled with little treats and given to that special someone in your life!
The box can easily be customized for any occasion, so try experimenting with different colour combinations or themes. I really like how this black and pink version turned out ❤️
Which colour combination or theme will you choose?
Sometimes it can be difficult to know what to buy someone special as a gift, and so you opt for a gift card. But how can you elevate your choice of gift into something fun and memorable? By making your very own cute gift card holder, of course! 🎁
Disguised as a wrapped present, this interactive gift card holder is super easy to assemble and will undoubtedly bring an element of surprise to your gift recipient! 🎁
The templates for this gift card holder come as SVG cut files, and can be found in my Etsy shop.
To make one, you will need:
* Present Gift Card Holder template (available as an SVG cut file) * Computer and printer to print the PDF instructions * Digital cutting machine * Double-sided cardstock (220-250gsm / 80-92lb recommended) * Craft glue / double-sided tape * Thin cord / string / thread for the optional gift tag
Watch my video tutorial showing how to assemble the gift card holder, and be sure to follow the tips below:
TIP 1 : Glue the long ribbon piece down the centre of the insert, making sure that the two hearts meet neatly at the top.
TIP 2 : Slide the insert into the holder, then glue the shorter ribbon piece down the centre, so that the ends join up with the other ribbon piece on the front and the back. You can then trim off any excess.
TIP 3 : Attach the two separate heart pieces to the larger heart using dimensional foam or scraps of layered cardstock (one on the front and one on the back).
There’s also an optional gift tag that you could stamp a sentiment onto and attach it behind the smaller heart.
And don’t think that they have to be just for Christmas, you can customize them for any occasion using any cardstock of your choice!
Once assembled, your cute little gift card holder is ready to go – it doesn’t need to be wrapped – and because it’s fairly flat, it can easily be popped into an envelope for posting! ✉️📮
It’s time for another teapot favour box design and, with Christmas fast approaching, I’ve created this one in the style of Santa Claus! 🎅🏻
Doesn’t he look jolly! With a big, textured beard and a festive hat that doubles up as the lid, you’re going to have such fun arranging his features and filling it with all sorts of delicious Christmas treats!
The templates come in both SVG and PDF format, making them accessible for a variety of crafting needs.
To make one, you will need:
* Santa Claus Teapot Box template (SVG and PDF available) * Computer and printer to print the PDF templates and instructions * Digital cutting machine * Double-sided cardstock (220-250gsm / 80-92lb recommended) * Craft glue / double-sided tape
If you are not using a cutting machine you will also need: * Craft knife / scissors * Scoring tool * Ruler
Watch my video tutorial showing how to assemble the teapot box, and be sure to follow the tips below:
TIP 1 : Assemble the main teapot pieces first before adding any of the features.
TIP 2 : Once the lid is assembled, apply a small dot of glue to the centre to help it hold its position. The rose on top will cover this when it’s positioned correctly.
TIP 3 : Join the two white hat trim pieces together using one of the small tabs. This can then be glued to the lid by lining up the score line against one of the lid joins and wrapping it around the lid. You may need to trim off some excess at the end, depending on the weight of your cardstock.
TIP 4 : Join the two beard pieces together so that the one with the cut out design is on top and they both line up at the base. You can then attach the face panel to the back (lining up the top edge between the two corners) and add the features. I recommend curling up his moustache at the ends for added dimension!
TIP 5 : When attaching the face to the front of the teapot, carefully line it up along the top edge.
Once assembled, your little teapot box will hold eight of these Lindt chocolates, making it perfect for table favours and Christmas parties! 🎅🏻
But what will you fill your little Santa Claus teapot boxes with? Let me know in the comments below!
Easy to open, these super cute pencil favour boxes can be filled with sweets or small treats. Ideal for stationery addicts, teacher gifts, back to school gifts and so much more!
The template comes as an SVG cut file, as well as a plain black and white PDF if you prefer to cut out by hand. You can therefore choose your own colour scheme and easily resize it to suit your needs.
To make one, you will need:
* Pencil Favour Box template (SVG and PDF available) * Computer and printer to print the PDF template and instructions * Digital cutting machine * Double sided cardstock (220-250gsm / 80-92lb recommended) * Thinner card or paper for the pencil lead pieces (90-160gsm / 33-60lb recommended) * Craft glue / double-sided tape
If you are not using a cutting machine, you will also need:
* Craft knife / scissors * Scoring tool * Ruler
Watch my video tutorial showing how to assemble the box and be sure to follow the tips below:
TIP 1 : This isn’t necessary, but I tried to follow the decorative pattern around the pencil by adding the panels in the same order that they had been cut out by my Cricut. I lined the panels up fairly closely like this in Design Space to try to keep as much of the pattern continuity as possible.
TIP 2 : Start with the shortest tab on the pencil point piece and glue it to the first section of the pencil. Make sure that the (red) curved edge is not stuck down.
TIP 3 : When gluing the two long tabs, interlock them and use a long pencil or pen to press against the join from the inside.
The pencil lead point and the lead circle on the end need to be cut out of thin card or paper. This will give it a nice smooth, flush finish. You can use a traditional pencil lead (dark grey) colour, or choose to make it a coloured pencil, matching the lead with the colour of the pencil box.
TIP 4 : Fold the lead point into shape before attaching it to the pencil, making sure the two edges join neatly without leaving a gap.
TIP 5 : Glue the lid insert to the underside of the lid, making sure that it is lined up centrally with an equal distance (approximately 1mm) around the outside.
TIP 6 : If needed, glue one or two small tabs of matching cardstock to the front of the lid insert to help hold the lid closed. The need for this varies depending on the thickness of the cardstock used.
This really is a fabulous little favour box, and I love how mixing up the colours and patterns recreates how real pencils look when they are together in a pencil case or pencil pot!
Create a splash at your next summer beach event with these adorable little Beach Hut Favour Boxes! Perfect for summer holidays and beach themed parties, they are easy to assemble and can be filled to the brim with sweets or small treats.
Whether you’re making them as gift boxes or as a whimsical touch to your home decor, they will instantly bring the carefree vibes of beach life to any setting and are sure to impress your guests!
The templates for these boxes are available on my Etsy shop and the easy to follow instructions provided make it quick and effortless to assemble them.
It’s time for another teapot favour box design and this time I’ve created one in the style of a Christmas Tree! 🎄
Doesn’t it look amazing! With a shiny star on the top and lots of decorations to add on, you can really go to town with this design, using any colour scheme of your choice!
The templates come in both SVG and PDF format, making them accessible for a variety of crafting needs and the easy to follow instructions make it quick and effortless to assemble these novelty gift boxes.
To make one, you will need:
* Christmas Tree Teapot Box template (PDF and SVG available) * Computer and printer to print the PDF templates and instructions * Digital cutting machine * Double-sided cardstock (220-250gsm / 80-92lb recommended) * Craft glue / double-sided tape
If you are not using a cutting machine you will also need: * Craft knife / scissors * Scoring tool * Ruler
Watch my video tutorial showing how to assemble the teapot box, and be sure to follow the tips below:
TIP 1 : Attach the six side pieces one at a time to the base, and don’t forget to leave the last side open.
TIP 2 : When attaching the handle, bend the last ‘branch’ towards you so you can line up the score line.
TIP 3 : When attaching the spout, carefully place it over the lower ‘branch’ to get it in the correct position.
TIP 4 : Once the lid is assembled, add a small dot of glue to the centre to hold its position. The star will cover this when it’s positioned correctly.
Once assembled, the little teapot box will hold eight of these Lindt chocolates, making it perfect for table favours and Christmas parties! 🎄
Esselle Crafts 