Daisy Double Bow Template

18th Oct 202518th Oct 2025 EsselleCraftsLeave a comment

Following on from my pevious posts, where I introduced you to my Halloween Bat Bow, my Butterfly Bow, my Crown Bow and my Mermaid Bow templates, I now have this Daisy Double Bow design, which can be used in similar ways.

A papercraft gift bow made from yellow cardstock with a white and yellow paper daisy in the centre for adding to gift packaging

This is such a pretty bow for all occasions! If it was made from fabric, it could be clipped onto your hair or worn as a statement brooch! Alternatively, if it was made from cardstock, it could be added to a gift bag, a greeting card or used for home decor!

This multi-purpose bow is super easy to make, and the templates come in SVG and PDF format, making them accessible for a variety of crafting needs.

A hair bow made from yellow faux leather with a white and yellow faux leather daisy in the centre for adding to a hair clip or headband

To make one, you will need:

* Daisy Double Bow Template (SVG and PDF included)
* Computer and printer to print the PDF template and instructions
* Digital cutting machine
* Double-sided, solid core cardstock (220gsm / 80lb recommended) or faux leather / felt / fine glitter fabric
* Hot glue / E6000 glue
* Optional : Alligator clip

If you are not using a cutting machine you will also need:

* Craft knife / scissors

All of my templates come with step-by-step instructions, but you can also follow the tips below:

TIP 1 : When curling the ends of the bow pieces to the centre, try not to crease them or fold them. This is especially important if you are making a paper bow.

TIP 2 : Attach the centre of the bottom bow to the centre of the bow tails with a dot of glue, then attach the top bow on top.

TIP 3 : Wrap the centre strip around the bow (not too tight) and secure the ends at the back with a dot of glue.

TIP 4 : You can leave your bow like this, or add the daisy pieces to the centre with a dot of glue.

If your bow is made from paper, then you can glue it directly onto your gift packaging. Alternatively, glue it to a small, wooden peg so that it can be reused. If your bow is made from fabric, then you can glue it to an alligator clip or other hair accessory, like a headband 🎀

I can’t wait to see how you use your little daisy bows!

Happy crafting
Suzanne

3D Papercraft Projects · Hair Bows · Papercraft Projects

Mermaid Bow Template

14th Oct 202514th Oct 2025 EsselleCrafts1 Comment

You may have seen my last three posts, where I introduced you to my Halloween Bat Bow, my Butterfly Bow and my Crown Bow templates. Well, now I have this Mermaid Bow, with its fabulous fish tails and seashell detailing.

A mermaid gift bow made from blue glitter cardstock and teal and cream cardstock that can be used on gift packaging or home decor

If this bow was made from fabric, it could be clipped onto your hair or worn as a statement brooch as part of a seaside / beach-themed costume! Alternatively, if it was made from cardstock, it could be added to a gift bag, a greeting card or used for home decor!

This multi-purpose bow is super easy to make, and the templates come in SVG and PDF format, making them accessible for a variety of crafting needs.

A mermaid hair bow made from blue glitter fabric and teal and cream faux leather that can be used on a hair clip or worn as a brooch

To make one, you will need:

* Mermaid Bow Template (SVG and PDF included)
* Computer and printer to print the PDF template and instructions
* Digital cutting machine
* Double-sided, solid core cardstock (220gsm / 80lb recommended) or faux leather / felt / fine glitter fabric
* Hot glue / E6000 glue
* Optional : Alligator clip

If you are not using a cutting machine you will also need:

* Craft knife / scissors

All of my templates come with step-by-step instructions, but you can also follow the tips below:

TIP 1 : If you want a 7.8cm / 3″ bow, size your template to 12cm / 4.7″ wide. For a larger, 10.5cm / 4.1″ bow, size your template to 16cm / 6.25″ wide.

TIP 2 : When curling the ends of the bow piece to the centre, try not to crease them or fold them. This is especially important if you are making a paper bow.

TIP 3 : Glue the bow to the centre of the fish tails, then glue the seashell piece to the centre of the bow.

TIP 4 : Glue one end of the centre strip to the back of the bow, wrap it around the front and secure the other end at the back with glue.

If your bow is made from paper, why not try embossing the tails with a fish scale embossing folder? I did mine half facing one way and half facing the other way. Then you can glue it directly onto your gift packaging. Alternatively, glue it to a small, wooden peg so that it can be reused. If your bow is made from fabric, then you can glue it to an alligator clip or other hair accessory, like a headband 🎀

I can’t wait to see how you use your little mermaid bows!

A mermaid bow made from blue glitter cardstock and teal and cream cardstock that can be used on gift packaging or home decor

Happy crafting
Suzanne

3D Papercraft Projects · Hair Bows · Papercraft Projects

Princess Crown Bow

2nd Oct 20257th Oct 2025 EsselleCrafts2 Comments

You may have seen my last two posts, where I introduced you to my Halloween Bat Bow and my Butterfly Bow. Well, now I have this sparkly Crown Bow, which can be used in very similar ways.

A princess crown bow made from gold glitter cardstock that can be used on gift packaging or home decor

This is such a pretty bow for so many occasions! If it was made from fabric, it could be clipped onto your hair or worn as a statement brooch as part of a princess or queen costume! Alternatively, if it was made from cardstock, it could be added to a gift bag, a greeting card or used for sparkly home decor!

This multi-purpose bow is super easy to make, and the templates come in SVG and PDF format, making them accessible for a variety of crafting needs.

A princess crown bow made from faux leather and thin gold glitter fabric that can be used as a hair bow or a brooch

To make one, you will need:

* Crown Bow Template (SVG and PDF included)
* Computer and printer to print the PDF template and instructions
* Digital cutting machine
* Double-sided, solid core cardstock (220gsm / 80lb recommended) or faux leather / felt / fine glitter fabric
* Hot glue / E6000 glue
* Optional : Alligator clip

If you are not using a cutting machine you will also need:

* Craft knife / scissors

All of my templates come with step-by-step instructions, but you can also follow the tips below:

TIP 1 : If you want a 8.5cm / 3.3″ bow, size your template to 12cm / 4.7″ wide. For a larger, 12cm / 4.7″ bow, size your template to 16cm / 6.25″ wide.

Two princess crown bows one made from faux leather and thin gold glitter fabric that can be used as a hair bow or a brooch and one made from gold glitter cardstock that can be used on gift packaging or home decor

TIP 2 : When curling the ends of the bow pieces to the centre, try not to crease them or fold them. This is especially important if you are making a paper bow.

TIP 3 : Glue the centre of the bow tails and the bows to the centre of the crown piece (between the two cut lines) before attaching the centre strip.

TIP 4 : Push one end of the centre strip in through the top cut line (from the front) and the other end through the bottom cut line (from the front). Pull the ends through the back (not too tight) until they are an equal length.

TIP 5 : Overlap the two ends (trim them down if they are too long) and secure them in place with a dot of glue.

I can’t wait to see how you use your little crown bows!

Happy crafting
Suzanne

3D Papercraft Projects · Hair Bows · Papercraft Projects

Multi-Purpose Butterfly Bow

1st Oct 20257th Oct 2025 EsselleCrafts3 Comments

Following on from my last post, where I introduced you to my Halloween Bat Bow design, I now have this Butterfly Bow, which can be used in similar ways.

A pink butterfly bow made from textured cardstock that can be used on gift packaging or home decor

This multi-purpose bow is super easy to make, and the templates come in SVG and PDF format, making them accessible for a variety of crafting needs.

A pink butterfly bow made from faux leather and thin glitter fabric that can be used on a hair clip or head band

To make one, you will need:

* Butterfly Bow Template (SVG and PDF included)
* Computer and printer to print the PDF template and instructions
* Digital cutting machine
* Double-sided, solid core cardstock (220gsm / 80lb recommended) or faux leather / felt / fine glitter fabric
* Hot glue / E6000 glue
* Optional : Alligator clip

If you are not using a cutting machine you will also need:

* Craft knife / scissors

All of my templates come with step-by-step instructions, but you can also follow the tips below:

TIP 1 : If you want a 7.5cm / 3″ bow, size your template to 12cm / 4.7″ wide. For a larger, 10cm / 4″ bow, size your template to 16cm / 6.25″ wide.

Two pink butterfly bows one made from faux leather and thin glitter fabric that can be used as a hair bow or a brooch and one made from cardstock that can be used on gift packaging or home decor

TIP 2 : When curling the ends of the bow piece to the centre, try not to crease it or fold it. This is especially important if you are making a paper bow.

TIP 3 : Glue the centre of the bow tails and the bow to the centre of the butterfly (between the two cut lines) before attaching the centre strip.

TIP 5 : Overlap the two ends and secure them in place with a dot of glue.

I can’t wait to see how you use your little butterfly bows !

Happy crafting
Suzanne

3D Papercraft Projects · Hair Bows · Halloween Party · Papercraft Projects

DIY Halloween Bat Bow

27th Sep 202513th Oct 2025 EsselleCrafts4 Comments

Bows come in all shapes and sizes and can have different styles and uses. Hair bows are typically made from fabric so that they are durable and weatherproof, whereas gift packaging bows are often made from paper or cardstock and are generally used only once 🎀

So, this got me thinking… What if a bow design could be used as both a hair bow and as a gift packaging bow? It would obviously depend on what material it was made from, but it could definitely be multi-purpose.

So I started with this Halloween bat bow design.

A black and purple bat bow made from textured cardstock that can be used on Halloween gift packaging or home decor

This is a great one for Halloween costumes! If it was made from fabric, it could be clipped onto your hair or worn as a brooch on a flowing cape! Alternatively, if it was made from cardstock, it could be added to a trick or treat bag, a Halloween greeting card or used for spooky home decor!

This multi-purpose bow is super easy to make, and the templates come in SVG and PDF format, making them accessible for a variety of crafting needs.

A black and purple bat bow made from faux leather and thin glitter fabric that can be used as a Halloween hair bow or a brooch

To make one, you will need:

* Halloween Bat Bow Template (SVG and PDF included)
* Computer and printer to print the PDF template and instructions
* Digital cutting machine
* Double-sided, solid core cardstock (220gsm / 80lb recommended) or faux leather / felt / fine glitter fabric
* Hot glue / E6000 glue
* Optional : Alligator clip

If you are not using a cutting machine you will also need:

* Craft knife / scissors

All of my templates come with step-by-step instructions, but you can also follow the tips below:

TIP 1 : If you want a 10cm / 4″ bow, size your template to 12cm / 4.7″ wide. For a larger, 13cm / 5.2″ bow, size your template to 16cm / 6.25″ wide.

Two black and purple bat bows one made from faux leather and thin glitter fabric that can be used as a Halloween hair bow or a brooch and one made from cardstock that can be used on Halloween gift packaging or home decor

TIP 2 : When curling the ends of the bow pieces to the centre, try not to crease it or fold it. This is especially important if you are making a paper bow.